For those who are having problem to emulate 2,3 or 4 controllers, here is what to do…

1: Open the x360ce.ini file..
2: Scroll down until u see “[PAD2]“(without inverted commas).
3: Under that line u’ll see this
“Index=-1″ just change it to 1, like this “Index=1″ (without inverted commas) and that’s it u can use up to 4 controllers. To use 3rd and 4th controller just go under the appropriate controller ( e.g “[PAD3]“”[PAD4]“)and change the
‘Index=-1″ to “Index=1″ for 3rd and same for the 4th controller.
Now match the config as the 1st controller and you are done.

Have Fun….!!

I have the same gamepad and always shows not connected.

How did you solve it?

Thanks,
Norton